Most Kawasaki Mule owners are looking at a 72-inch Eagle straight blade, front mount, winch lift. That’s the right blade for most of the line. HitchDoc Outdoors sells four complete kits, one per Mule family, not one generic Kawasaki plow. They’re split because a compact two-seat Mule SX and a full-size six-seat Pro are very different machines, and they don’t share a frame. Every complete kit gives you a mount, push tube, and blade, built in Minnesota from American steel. Two exceptions. On a wide 1000 Pro, the 80-inch blade is the better pick. On a small Mule SX, the 66-inch blade can be the better fit. Both are build-your-own orders.

Key Takeaways

  • There are four complete Eagle kits for the Mule, by family: SX, Pro-MX, Pro 820 and 1000, 4000 and 4010.
  • Every complete kit is a 72-inch steel straight blade on a front mount, $976.95.
  • If your Mule is a 1000 Pro and 64 inches wide, the 80 clears the tires when angled.
  • A winch is the lift path on UTV Eagle systems. There’s no UTV hand-lift kit.
  • Older Mules aren’t forgotten. The Kawasaki mount can build a system with a push tube and blade.

Will an Eagle Plow fit my Mule?

If it’s 2001 or newer, there’s a good chance. The Mule line has more names than you’d expect, and that’s what confuses people. A Mule SX and a Mule Pro-FXT sound close, but they’re very different machines once you look at the frame. One’s a compact two-seater with a 401cc single. The other’s a full-size six-seater with a 999cc twin. Different frame, different mount.

That’s why the kit’s built by family, not by brand. We don’t just say Kawasaki. We match the mount to your model and year. The Kawasaki UTV front plow mount covers most of the Mule lineup, including the SX, the Pro-MX, every 820 and 1000 Pro, the 4000 and 4010, and even the older 600, 610, 3000, and 3010. You pick your model and year, and you get the mount that bolts to your frame.

The mount’s 1/4-inch American steel. It bolts to the frame with grade 5 hardware, and the push tube pins to it with clevis pins. So once the mount’s on, pulling the plow off for a day of hauling means pulling pins, not wrenching on bolts.

Which Mule kit do I order?

Start with the model name on your machine, then check the year. That’s the whole job.

Mule SX (2017 to 2025)

The Mule SX complete system fits the 400 Mule SX, XC, SE, and LE from 2017 through 2025. That’s the compact Mule. It’s 52.6 inches wide and runs a 401cc engine, so read the blade-size section before you order. This is the one Mule where going smaller can make sense.

Mule Pro-MX (2019 to 2025)

The Mule Pro-MX complete system fits the 700 Pro-MX from 2019 through 2025. The Pro-MX is 60 inches wide with a 695cc engine, which is right where a 72-inch blade belongs. If you have a Pro-MX, this is the easy one. Order it and go.

Mule Pro 820 and 1000 (2015 to 2026)

One Mule Pro complete system covers the whole full-size Pro family. The title says 2015 to 2026, but the real years depend on your model:

  • 820 Mule Pro-FXT: 2015 to 2025
  • 820 Mule Pro-FX and FX LE: 2016 to 2025
  • 820 Mule Pro-FXR: 2018 to 2025
  • 1000 Diesel Mule Pro-DX and DXT: 2016 to 2025
  • 1000 Mule Pro-FX, FXR, and FXT: 2024 to 2026

So a 2026 Pro-FXT 1000 is covered. A 2026 Diesel isn’t on the list yet. If your machine falls outside those years, call us before you order.

Mule 4000 and 4010 (2009 to 2026)

The Mule 4000 and 4010 complete system fits the 4000 and 4000 Trans plus the 4010, 4010 SE, 4010 Trans, and 4010 Diesel, all from 2009 through 2026. That’s eighteen model years on one kit. Got a 2009 4010 you’ve run for years? It takes the same kit as a new one.

What about older Mules and the newest models?

There’s no complete kit for the 600, 610, 3000, or 3010, but you’re not out of luck. The Kawasaki mount covers all four, so you can build your own Eagle Plow from the mount, a push tube, and a blade. Same parts, ordered one at a time.

Kawasaki keeps rolling out new model years, and the kit listings can run a year behind. The Mule SX and Pro-MX kits currently stop at 2025. If you just bought a 2026 or 2027, the page might not show it. Call (800) 446-8222 and we’ll tell you what fits. Don’t guess.

What size blade does a Mule need?

Here’s the rule of thumb. Measure your machine outside to outside of the front tires. Get a blade wider than that. That’s the whole move. Angled, it still clears a path for your tires, so you’re not driving in the snow you just pushed. Our blade sizing guide walks through it in more detail.

An Eagle blade angles 30 degrees each way, and the angle shrinks the width it cuts. Angled, a 66-inch blade clears 57 3/4 inches. A 72 clears 63. An 80 clears 70. Now line those up against Kawasaki’s published overall widths:

Overall width is a quick check, not gospel. It can include fender flares and mirrors, so grab a tape and measure your own front tires before you order.

Should I run an 80 on a 1000 Pro?

I would. A Pro-FXT 1000 is 64 inches wide with a 999cc twin, and our blade chart pairs the 80-inch blade with 850cc and up. Angled, the 80 cuts 70 inches, so your tires stay on cleared ground. The complete kit ships with a 72, which plows fine pointed straight ahead. But angle it to windrow snow off the driveway, and a 72 on a 64-inch machine leaves your tires riding in the edge of the pile. Any Eagle blade fits any Eagle system. Building it with the 80 means the same mount and push tube, just a bigger blade.

Is a 72 too much blade for a Mule SX?

It might be. Not always. The SX kit ships with a 72. It’ll clear the tire path with plenty left over. But the SX runs a 12.3-horsepower single, and our blade chart pairs the 72 with 700cc and up. A 72-inch blade full of wet snow’s a lot to push with that engine. A 66 still clears the SX by about five inches when angled. If you’re plowing a long gravel drive on an SX, I’d build it with the 66. For light snow on a short drive, the 72 does the job and finishes in fewer passes.

Not sure why the angle matters so much? Tony answered that one in our video on why the Eagle blade has five positions. Straight ahead is for stockpiling. Angled left or right is for windrowing and pushing snow off the drive.

Do I need a winch on a Mule?

Yes. On a UTV, the Eagle blade lifts with a winch, and that’s the only option. There’s no hand-lift kit for the UTV systems. The complete kits don’t include a winch, so if your Mule doesn’t have one, add it to the order.

We carry Eagle winches and winch mounts, with winches in 2,000, 2,500, and 3,500-pound sizes. The Kawasaki winch mount covers the SX, the 820 and 1000 Pro models, the 4000 and 4010, and the 600 and 610. On some Kawasaki part numbers, the winch mount’s built right into the plow mount. The part number you get when you pick your model and year tells you which one you have.

Some Mules come with a winch from the factory. The 2026 Pro-MX SE ships with a WARN VRX 35, and the Pro-FXT 1000 LE Ranch Edition ships with a WARN VRX 45. If you’ve got one of those, you probably don’t need a second winch. But don’t assume the plow just works with it. A factory winch sits on Kawasaki’s own mount, not ours. Call us before you order and we’ll make sure the plow and your factory winch work together. Our winch mounts are drilled for Eagle winches, and some of them are rated for winches up to 3,500 pounds only.

For sizing and the full winch-versus-hand-lift rundown, see our winch guide.

What does a Mule plow cost?

All four complete Mule kits are $976.95, and US ground shipping is free on orders over $100. That’s the mount, push tube, and 72-inch blade, ready to bolt on.

If you build your own, the pieces are priced separately. The Kawasaki UTV mount is $164.95. The UTV push tube runs $350.95 to $396.95, depending on whether you run tires or the extended version for tracks. Eagle straight blades run $294.95 to $533.95 depending on size. Add a winch if you need one.

Which way should you go? If the 72 is right for your Mule, the complete kit is the easy order. If you want an 80 on a 1000 Pro, a 66 on an SX, or tracks on your machine, build it. We break the trade-off down in complete systems versus building your own.

Get the Eagle Plow for your Mule

We cut, weld, and powder coat every Eagle mount, push tube, and blade from American steel in our own Minnesota shop. Then we ship it straight to you. Every kit comes with a reversible wear bar, adjustable skid shoes, trip springs, and a rubber snow flap. Plow markers, too, so you can see the blade edges from the seat. The blade also has four pitch positions on bolt-on stops, so you can tune it to your surface. And if you’d rather run a V on a Pro, our V plow versus straight blade guide covers the trade-offs.

Know your Mule and know your driveway? You can order this in about five minutes. Shop complete UTV plow systems, or build your own Eagle Plow if you want a different blade.

Frequently Asked Questions

What size snow plow do I need for a Kawasaki Mule?

For most Mules, a 72-inch blade. It clears the tire path on the SX, the Pro-MX, and the 4010 when angled. On the 64-inch-wide 1000 Pro models, step up to an 80 so the angled blade still clears your tires.

Will one Eagle kit fit every Mule?

No. There are four complete kits, one each for the SX, the Pro-MX, the Pro 820 and 1000 family, and the 4000 and 4010. They use different mounts because the frames are different. Match the kit to your model and year.

Is there an Eagle Plow for an older Mule 610 or 3010?

Yes, as a build-your-own system. The Kawasaki UTV front plow mount covers the 600, 610, 3000, and 3010. Pair it with the UTV push tube and an Eagle blade.

Can I use the factory WARN winch on my Mule to lift the plow?

Possibly. A winch is what lifts the blade, but a factory winch sits on Kawasaki’s own mount, not ours. Call us before you order and we’ll check how the plow and your winch work together on your machine.

Do I have to take the mount off in the summer?

Some mounts should come off in the off-season to keep your ground clearance. Others can stay on. If you’re not sure which you have, ask us when you order.

Got a Mule and a driveway that needs clearing? Find your kit, or call us at (800) 446-8222 and we’ll match it to your machine. For the big picture on blade types, mounts, and lift options, start with how to choose the right ATV or UTV snow plow.